3 Types of Solar Panels: Advantages and Disadvantages

Solar panel system is now becoming more popular when it comes to powering electric supplies, both in industries and homes. It doesn’t only save you big bucks of money on energy saved, but it also helps the environment in so many ways. It is a great investment since it has a long life expectancy, but you need to consider first what type of solar panel will work best for you. The following are the types of solar panels to choose from, and its advantages and disadvantages.  

 Solar Panels

Monocrystalline 

Monocrystalline panels are cut from silicon in a cylindrical way. Each cell when combined makes up this type of panel. It originated in the 1950s, the first technology of solar panels. They give the highest performance rate in the panel industry because it’s made from high-quality silicone. It uses the space wisely, thus can offer a high power yield per square foot. It has a life expectancy of 25 years. It can perform best on warm weather. However, it can be too costly because they are high-quality.  

Polycrystalline 

Polycrystalline is also manufactured from silicon, but unlike monocrystalline it is poured into a mold instead of cutting out. Then it will form the panels. If you’re using a solar panel for your home, this type of panel is good for you. It is cost-effective, so good news for those who are tight in budget and it also produces little waste which is good for the environment.  

Its disadvantage however is that its efficiency is lower, so don’t expect it to work well on industrial buildings. It also requires more space upon installation. If you want to produce the same power as monocrystalline, you have to look for a bigger space for this panel.  

Thin Film 

Thin film is manufactured from amorphous silicon by putting down layer upon layer of it. Thin film is lightweight, and it’s immune to damages caused by obstructions, shading or low-light conditions. These things don’t hinder the performance of the solar panel. It is also affordable because it is mass-produced. If you want to power up your home or commercial space, you can opt for this one.  

However, you have to remember that it also comes with disadvantages too. When it comes to efficiency and performance, it scores very low with the operating efficiency of 9%. A big space is also required, so if you have a tight space it won’t work. When you use it for commercial purposes, it will work. It is also costly because of the number of panels needed to manufacture it. To accommodate the system you have purchase more elements like cable and others.  

Solar panel system is complicated, so when you buy one from Solar Panel Riverside RI USA make sure you talk with the manufacturers about the power you need and how much electricity all of your appliances consume every month. You also have to consider you location, the weather, your budget of course and a couple of other things. It might cost you a lot on the first purchase but imagine your savings over the years.  

Read More